Healthway 20600-3 EMF Air Purifier
The Healthway air purifier is the only machine we have found to deliver 100% efficiency at cleaning the air, when measured with a particle meter at 0.3 microns.
Typically indoor air will contain 10,000 to 30,000 particles per litre at 0.3 micron in size. With the Healthway air purifier, this figure is reduced to ZERO when the particle count is taken of the air exiting the air purifier. This is the most effective air purifier on the market today.
All the other 'air purifiers' on the market that we have tested show a reading from 1000 to 8000 particles per litre, under the same test conditions.
The Healthway air purifier will deliver this unbeatable 'ZERO particle' result on all three speed settings. Thanks to the high flow rate and zero particle output, this is the most effective air purifier available.
Please check out the video to view the test results for yourself.
Contact us to arrange a demonstration.
email: sales@healthwayuk.com
Tel. 0208 144 7815
1. Electronic Control Panel-Filter Light: Monitors filter efficiency and indicates when to replace filter-Bio-Monitor light: Shows the Enhanced Media Filtration (EMF) is working at peak efficiency-Convenient three speed control-Low speed: ULTRA quite air flow mode
2. 100% Sealed Filtration - As incoming air passes through the 100% sealed filter chamber, the advanced air cleaner system captures 0.3 micron particles which is a respirable particulate size. The HealthWay advanced air cleaner system captures 4x the particles as similar sized HEPA filtration systems.
3. For medical purposes, the HealthWay Advanced Air Purification System is used to remove particles from the air.
4. 100% Sealed Filtration
5. Dual Air Intake Blower-Drives a consistent volume of air & provides quiet operation.
6. Four Stage Filter-Provides particulate prefiltering and multiple gas/chemical scrubbing-Dual pre-filters are cleanable for extra particulate reduction-Carbon/Zeolite media for gas odor and chemical reduction 360 Degree Air Entry Design - Allows placement anywhere ensuring all of the room air is treated.
Four Stage Filter-10 Micron Pre-filter - Zeolite-10 Micron Pre-filter - Honeycomb Activated Carbon
Wattages: High - 125w, Medium - 75w, Low - 65w
CFM: High - 200, Medium - 130, Low - 70 CFM
Healthway 10600-9 EMF Air Purifier- Domestic use.

Healthway 10600-09 EMF Air Purifier is designed for home or small office use. It uses the same Advanced, patented technology that makes Healthway the world leader in Indoor Air Quality.
Healthway 10600-09 EMF Air Purifier is designed for home or small office use. It uses the same Advanced, patented technology that makes Healthway the world leader in Indoor Air Quality.
The EMF germ killing zone not only removes all micro organisms, viruses, bacteria from your air, but destroys everything that passes through the unit.
When tested withg a particle counter set at 0.3 micron the Healthway EMF air purfier shows a 100% cleaning rate - EVERY particle measuring 0.3 micron or bigger is captured and destroyed, making the Healthway 10600-9 this the most effective home air purifier available.
Specification
Healthway 10600-9 EMF Air Purifier
Voltage: 230V/50Hz
Use of environmental humidity: 40%-85%
Three settings to allow you to increase performance when required:
Position Power consumption Air flow m3/h Noise db
High 65w 100 60
Medium 40w 60 50
Low 35w 35 40
Maximum room size: 46.5m2/500 sqaure feet (for effective purification)
Size HxWxD: 590×385×285mm
Weight: 8kg
FREE UK DELIVERY!
3 Years Warranty
Gradko DC1100 Air Particle Meter - £292.50 inc
|
Gradko DC1100 Air Particle Meter.
|
|


Scientific Studies and Health Problems
Scientific studies have found an association between exposure to particulate matter and significant health problems in people with:
- Aggravated Asthma
- Chronic Bronchitis
- Reduced Lung Function
- Irregular Heartbeat
- Heart Attack
- Lung Disease
Individuals particularly sensitive to fine particle exposure:
- Older adults
- People with heart and lung disease
- Children
|
 |


The First Affordable Air Particle Monitor
The DC1100 is the first affordable instrument designed for monitoring particulate pollution in homes and work places. It detects airborne particulates including dust, mold, pollen, bacteria, tobacco smoke, pet dander, dust mite debris and more. The DC1100 continuously monitors and stores data so that you can analyze the cleanliness of your home or work place.
The DC1100 is simple to operate. All that needs to be done is to plug the unit in and turn it on. Once turned on the unit will automatically configure itself to run in continuous mode and display the current level of particulate pollution for both small and large particles. The data sampled will also be recorded for future analysis.
In addition, a dynamic bar graph will be displayed which will give the user an immediate visual indicator of the number and size of particles being detected. |
 |


Record and Analyse Air Quality Yourself
With the DC1100 you will be able to tailor your efforts to achieve the required air quality. The quality of ambient air varies greatly even within a period of 24 hours, windows/ doors are opened or closed, the air conditioning comes on, building or other work activity commences or any number of other factors.
Large differences in particle numbers and size can be observed between rooms in a single house. If a typical reading in a home reads between 200 and 2000 (average 1000) small particles on the DC1100 reducing the average to 100 particles means that you are breathing 1/10th of particles than before.
An even greater improvement can be achieved by reducing the particles in each room. The DC1100 provides the data to enable these improvements to be made.
Optional RS232 Terminal Interface
- For collecting data to produce graphical readout
- Stores up to 30 days of data
|
|
 |
 |
 |
 |
 |
| Check what you're breathing! |
| The DC1100 monitor detects airborne particulates including dust, mold, pollen, bacteria, tobacco smoke, pet dander, dust mite debris and more. |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Recognising the Symptoms of Asthma |
Take Control of your Asthma |
Simple to Operate - just plug in and turn on! |
 |
 |
 |
Asthma is a condition that affects the airways – the tubes that carry air in and out of the lungs. The usual symptoms are:
- Coughing
- Wheezing
- Tightness in the chest
- Shortness of breath
It is believed that environmental factors can contribute to someone developing asthma - one of these is Air Pollution, especially Particulates. |
The DC1100 from Gradko is the first affordable instrument which can monitor Airborne Particulates including:
- Dust
- Mould
- Pollen
- Bacteria
- Tobacco smoke
- Pet dander
- Dust mite debris
|
The DC110 is simple to operate - all that needs to be done is to plug the Unit in and turn it on.
The Unit then displays a dynamic bar graph which will give the user an immediate visual indicator of the number and size of particles being detected. This information will allow the user to have a much more effective control over the quality of the air in your room or building. The data is also recorded for future use. |
|
Healthway EMF vs HEPA

HealthWay’s Revolutionary Advanced Air Cleaner System surpasses HEPA filtration!
EMF stands for Enhanced Media filtration. EMF main filter is less dense around 85% at .3 micron, but within the system the high energy field raises the efficiency of the filter to 99.99% at .3 micron.
HEPA stands for High Efficiency Particulate Arresting. The standard for HEPA efficiency is 99.97% at .3 microns. This has become very "confusing to many people in the industry. There are two main types of HEPA’s that are marketed today. First you have your True Medical Grade HEPA systems. These machines are indicating that their total system efficiency is 99.97% at .3 microns or better. Total system efficiency means the air coming in the machine will be 99.97% cleaner at .3 micron after it has passed through the filter apparatus, in this case the HEPA filter.
Big Box HEPA’s- Your lower end machines that state HEPA type are indicating that they are using a HEPA paper type media. HEPA Type means the filter media alone may have the ability to reduce particles up to 99.97% but total system efficiency is much lower, in most cases around 50%. The cause of this is bypass around the filter media in the filter frame or no sealing in the unit allowing particles around the filter, no sealing etc.
HEPA- HEPA has always been a good particulate capturing device, but the drawbacks EMF compensates for. Below is a brief comparison on True HEPA systems vs. EMF. High air flow restriction HEPA is a very dense paper media 99.97% at .3 micron. This is great for efficiency but can result in poor air cleaner performance more specifically reduced airflow. You can have the most efficient filter in the world but if you do not move enough air your air cleaner is ineffective. You see many manufacturers make the claim of silent HEPA. The physics behind mechanical filtration are, if you have a dense media you need a strong motor and blower to really push the air through the filter this results in NOISE. In most cases manufacturers are not pushing any air through their machines on low or medium speed and they are claiming silent or quiet. This may be the case but they are not providing effective air cleaning either. On high speed TRUE HEPA systems are providing clean air at 99.97% efficiency at .3 microns, but they sound like a jet taking off.
The EMF main filter is less dense around 85% at .3 micron, but within the system the high energy field raises the efficiency of the filter to 99.99% at .3 micron without restricting the airflow like a true HEPA. The end result is better overall system efficiency than TRUE HEPA with much more airflow. This can also be done much quieter because the motor and blower do not have to work as hard to push the air through the filter.
HEPA- The dense media filter can load with particulates rather quickly. Most HEPA systems are on timers therefore not truly indicating when filters actually need to be changed. In many cases these filters need to be changed every six months.
EMF- with a less dense media filter you can expect 4X the loading capacity of a similar sized HEPA. With true filter monitoring by pressure drop we can indicate when the filter has reached its maximum loading capacity. The EMF main filter also incorporates SST technology. Spun Sealed Technology ensures every filter is 100% sealed. This will guarantee the consumer is receiving maximum performance from their machine.
HEPA- it has been long known that after media filters become coated they may have the tendency to create a breeding ground for bacteria. When moisture is built up in a filter, bacteria, viruses, and fungi have a better chance of staying alive and incubating or reproducing. This can create a very dangerous environment inside the filter media. If filters are not changed timely microorganisms may possibly breed through the filter or disperse back into the environment when changing the filter.
EMF- Enhanced Media Filtration was developed by focusing on this exact issue. Two metal grids, one on the top of the filter media, and one below the filter media contains 18kv of energy. This creates an uninhabitable environment for microorganisms to reproduce in the filter.
HealthWay has been a leading manufacture of HEPA, ULPA, ASHRAE and media filtration products for 30 years. The HealthWay advanced air cleaner system is a FDA regulatory Class II Medical Device used for removal of particles in the air for medical purposes.